All cars must be built to the standard specifications and without modifications, other than hop-up parts listed below.
The use of solid differentials is not permitted. These must be built as per kit instructions. However any grease or oil maybe used. Blu-tac or other similar substances are also not permitted.
- Hop-ups (50/53xxx)
- 50746 – CVA Super Mini Dampers
- 53056 – Pin Type Wheel Adaptor
- 53569 – Clamp Type Aluminium Wheel Hub (6mm Thick)
- 53344 – M03 Aluminium Heat sink
- 53345 – M03 Toe-in Uprights
- 53523 – M03/04 Aluminium Front Uprights
- 53597 – M03 Assembly Universal Shaft Set
- 53619 – CVA Mini Dampers
- 53070 - Tamiya Manta Ray ball diff set
- 53267 - TA03 Ball Differential Set
- Limited Edition parts (49xxx)
- 49444 M-03R Aluminium Motor Heat sink
- 49441 M-03R Aluminium Front Uprights
- 49442 M-03R Aluminium Rear Uprights (Toe-in)
- 49443 M-03R Aluminium Servo Mount
- 54000 M Chassis Alum Damper Set - 4pcs
- Other parts
- In the interest of cost control, some parts may be sourced from alternative suppliers, (Non Tamiya).
- These are...
- a ) Front Steering uprights.
- b ) Shocks.
- c ) Servo saver, (tamiya upgrade is pricey, and fragile)
- Speed Controllers
- 45029 ESC TEU-101BK
- CPR UNIT (FROM OLDER XB PRO KITS)
- Configuration of wires must be as supplied, however wires can be cut to length. Battery connector may be changed for different connectors (i.e. Deans Ultra, Powerpoles etc.). Bullet motor connectors may be removed to allow direct soldering to motors. Original switch must remain as standard, but can be mounted in an alternate position if required. The fitting of a power cap is not allowed. 3 step mechanical speedos are no longer allowed.
- Adur Model Car Club will also allow ANY ESC available in the UK with a retail price less than £40.
- Body shells
- Adur Model Car Club will allow ANY Bodyshell designed for the mini chassis.
- No additional wings are allowed. Kit supplied wings are permitted.
- Wheels and Tyres.
- Wheels.
- Any Tamiya 60D wheel can be used. This included hop up (53xxx,54xxx) and carbon reinforced wheels
- Tyres
- In the interests of cost control, we have moved away from restricting tyres to Tamiya only.
- Any rubber tyre can be used, as long as it fits on a 60D wheel.
- Motors
- 53689 Tamiya 540-J Kit supplied Johnson Motor
- 53068 Tamiya RS540 Sport Tuned.
- Batteries
- Any battery with a nominal maximum voltage of no more than 7.4v
Add this page to your favorite Social Bookmarking websites
